You already have a Furrion Vision S camera on your travel trailer, but now you want a larger monitor, sharper video, or recording capability. Can you simply replace the old display with a Vision S+ monitor and keep everything else?
That is where many RV camera upgrades become confusing.
The original Furrion Vision S and the newer Vision S+ look similar. Both use wireless cameras, offer rear observation, and support additional camera views on compatible configurations. Some camera housings and mounting brackets even look nearly identical.
However, the two generations are different camera systems, and their electronic components are not interchangeable.
A Vision S+ monitor will not pair with an older Vision S camera. Likewise, purchasing a new S+ camera does not make it compatible with a Vision S display already installed in the tow vehicle.
The good news is that some existing RV mounting brackets, pre-wired power connections, and marker-light mounting locations may still be usable during a complete system upgrade.
Quick Answer: Furrion Vision S+ improves on the original Vision S with 1080p cameras, updated 5-inch and 7-inch monitors, microSD recording, and firmware-update support. But Vision S and S+ cameras and monitors cannot be mixed. If you are upgrading generations, plan on a matched S+ camera-and-monitor system. Existing compatible mounting hardware and RV pre-wiring may be reusable after inspection.
This guide compares the two generations, explains which components can be reused, and helps RV owners choose between repairing an existing system, moving to Vision S+, or installing a separate aftermarket camera kit.
Quick Navigation
Compatibility reminder: Furrion Vision S and Vision S+ cameras and displays are separate electronic generations. Physical fit at an RV's pre-wired camera location does not establish monitor-pairing compatibility. Confirm the exact model numbers, mounting hardware, power connection, and supported camera family before purchasing parts. Camera systems supplement mirrors, direct observation, and safe towing procedures.
Furrion Vision S vs. Vision S+: What Actually Changed?
Vision S+ is the newer generation of Furrion's RV observation-camera system.
Both generations are intended to provide additional views around a travel trailer, fifth wheel, motorhome, or another compatible vehicle.
The meaningful differences involve image resolution, recording, monitor features, and component compatibility.
| Feature | Furrion Vision S | Furrion Vision S+ |
|---|---|---|
| System generation | Original Vision S | Newer Vision S+ |
| Rear camera resolution | 720 × 480 on common original Vision S camera kits | 1080p on current S+ rear cameras |
| Monitor sizes | 4.3", 5", and 7" options, depending on kit | 5" and 7" options |
| Multi-camera capability | Available on supported Vision S monitors | Up to four compatible camera channels on supported monitors |
| Wireless video | 2.4 GHz digital wireless system | 2.4 GHz proprietary digital wireless system |
| Rear camera viewing angle | 120° on common original camera kits | Up to 140° on current S+ sharkfin camera models |
| Infrared night vision | Available | Available with updated camera imaging |
| Motion detection | Available on supported configurations | Available, including supported auto-wake behavior |
| Video recording | Conventional Vision S observation kits are primarily live-view systems | microSD recording supported on compatible monitors |
| Firmware updates via SD card | Not a standard feature of the original kits compared here | Supported on S+ monitors |
| Cross-generation pairing | Uses Vision S-compatible cameras and displays | Uses Vision S+-compatible cameras and displays |
The differences are easiest to understand by separating three questions: image quality, system features, and whether your existing equipment can be reused.
Camera Resolution: 720 × 480 vs. 1080p
One of the clearest differences is the rear-camera resolution.
Original Vision S kits such as the FOS05TASF and FOS07TASF used rear cameras with a 720 × 480 image specification.
Current Vision S+ sharkfin cameras are advertised with 1080p resolution.
That higher camera resolution can preserve more image detail, which may help when observing:
- the road behind a travel trailer
- parking-space markings
- objects near a campsite entrance
- following vehicles
- selected low-light scenes
Camera resolution is only one part of the image-quality equation.
Monitor resolution, video transmission, image compression, lighting, and lens cleanliness also influence what the driver sees.
A 1080p camera specification does not automatically mean the monitor has a native 1920 × 1080 display panel.
Compare the complete camera-and-monitor system rather than relying only on the camera's advertised pixel count.
Camera Angles and Night Viewing
Common original Vision S rear cameras used a 120-degree viewing angle.
The newer Vision S+ sharkfin rear camera is advertised with a 140-degree field of view, while compatible side cameras use a different, narrower viewing angle.
A wider rear image can provide more context around a trailer, but it may also make objects appear smaller on screen.
For close reversing, camera placement and a visible trailer-edge reference remain important.
Both generations support infrared night-viewing features on appropriate cameras.
Actual visibility after dark still depends on camera location, ambient lighting, weather, and lens condition.
Multi-Camera Viewing Is Available on Both Generations
Vision S+ is often advertised with support for several camera views, including rear, side, and doorway cameras.
However, multi-camera support is not exclusive to Vision S+.
Supported original Vision S monitors could also work with multiple cameras, including rear and side configurations.
The newer generation adds other features, particularly improved camera resolution and recording.
Do not treat the number of supported cameras as the sole reason to replace a working Vision S system.
Generation comparison: The strongest reasons to consider Vision S+ are newer camera imaging, recording, and the current S+ hardware platform. Multi-camera viewing already existed on supported Vision S configurations.
Can Vision S and Vision S+ Cameras and Monitors Work Together?
This is the most important compatibility question for owners upgrading an existing Furrion system.
Vision S and Vision S+ camera-and-monitor components are not cross-compatible.
Furrion's official Vision S+ product information specifically identifies the newer system as incompatible with Vision S, Vision 1, and Vision 2 electronic components.
Even if the camera fits the same physical bracket, the electronic pairing system is different.
| Camera | Monitor | Will It Pair? |
|---|---|---|
| Vision S camera | Compatible Vision S monitor | Yes, when the exact models are supported |
| Vision S+ camera | Compatible Vision S+ monitor | Yes, when the exact models are supported |
| Vision S camera | Vision S+ monitor | No |
| Vision S+ camera | Vision S monitor | No |
| Aftermarket camera from another system | Furrion Vision S or S+ monitor | Not supported unless the manufacturer explicitly confirms compatibility |
| Matched aftermarket camera | Its corresponding aftermarket monitor | Yes, subject to that system's specifications |
Can You Upgrade Only the Monitor?
Suppose your RV already has an original Vision S rear camera and a 5-inch monitor.
You want a newer 7-inch Vision S+ display.
Buying the S+ monitor by itself will not allow it to connect to the older S camera.
If the goal is to retain the existing camera, you need a replacement display explicitly documented for the original Vision S system.
Furrion has offered original-generation replacement displays, including:
- Vision S 4.3-inch replacement monitor
- Vision S 5-inch replacement monitor, reference C-FOS07TAPK-009
Availability varies, so verify the exact replacement part and included accessories.
A monitor-only replacement may not include the mounting bracket or power cord.
If you want the newer S+ display and features, plan on replacing the incompatible camera electronics as well.
Can You Replace Only the Rear Camera?
The same rule applies in the other direction.
A Vision S+ sharkfin camera cannot simply be paired to an older Vision S monitor.
If your original rear camera fails but the monitor still works, look for the correct replacement camera within the Vision S generation.
If a suitable original-generation camera is unavailable or the cost of repair is unattractive, replacing the complete matched system may make more sense.
What About Existing Side Cameras?
Side cameras can make upgrades more expensive because a multi-camera RV may already have cameras incorporated into its marker-light positions.
If you upgrade from Vision S to Vision S+, the older Vision S side cameras cannot continue communicating with the new S+ monitor.
Compatible S+ side cameras are required.
Some original Vision S marker-light bases and wiring arrangements can be reused with particular newer S+ side-camera assemblies.
However, physical mounting compatibility should be confirmed for the actual side-light hardware.
Inspect:
- the existing marker-light base
- the camera module connection
- the lens and cover arrangement
- the wiring and connector condition
- the weather seal
Do not assume that every older side-camera housing will accept every newer camera module.
Does a Firmware Update Make the Generations Compatible?
No.
Vision S+ supports firmware updates through its SD-card system, but that feature should not be confused with cross-generation camera pairing.
A firmware update does not turn a Vision S camera into an S+ camera or allow unsupported components to work together.
Use the firmware and update procedure specified for the exact monitor model.
Compatibility rule: Match the camera and monitor generation first. Mounting hardware, pre-wiring, and wireless pairing are separate compatibility questions.
Vision S vs. S+ Monitors: Screen Sizes, Recording, and Everyday Use
The monitor influences more than image size.
It determines which cameras can be paired, how the views appear on screen, and whether recording or other supported functions are available.
4.3-Inch, 5-Inch, or 7-Inch?
The original Vision S family included several monitor sizes, including compact 4.3-inch versions and larger 5-inch and 7-inch configurations.
Current Vision S+ kits are available with 5-inch and 7-inch monitors.
For rear-only use, a 5-inch screen may be sufficient when it is mounted close to the driver's normal viewing position.
A 7-inch monitor becomes more attractive when:
- the screen sits farther from the driver
- multiple camera feeds are used
- the driver regularly switches between rear and side views
- split-screen readability matters
- the RV has a larger cab or dashboard
A larger display does not make an incompatible camera work, and it does not automatically improve the camera's captured resolution.
Before purchasing a larger monitor, confirm that it belongs to the correct camera generation.
How Vision S+ Recording Works
One of the major newer features is recording to a compatible microSD card.
Vision S+ monitors support video recording and can use the card for firmware updates.
The card is not included with all system packages, so check the specific kit contents.
Recording can be useful for:
- reviewing a parking maneuver
- looking back at selected road events
- checking recorded camera footage after a trip
- retaining available clips for personal reference
The amount of footage that can be stored depends on card capacity, active recording channels, video settings, and how the system manages stored files.
Use a compatible card with the speed rating and capacity specified in the monitor manual.
The availability of recorded footage should not be treated as a guarantee of a particular insurance or legal outcome.
Motion Detection and Parked-RV Viewing
Both product generations have offered motion-detection functions in supported camera arrangements.
Vision S+ combines supported motion detection and auto-wake behavior with its newer recording features.
This can be useful when the owner wants to check a selected doorway or exterior area while the RV is parked.
However, parked operation depends on how the camera receives power.
A camera connected to a circuit that turns off with the running lights or ignition cannot continue operating once that power is removed.
Confirm the actual power arrangement before expecting parked recording or motion monitoring.
A camera-based system also does not guarantee detection of every movement or prevent theft and damage.
Wireless Range and Monitor Performance
Vision S+ uses a proprietary 2.4 GHz digital wireless connection between the cameras and monitor.
Furrion publishes transmission testing of up to 100 feet while driving at highway speeds and up to 492 feet under open-area conditions for supported S+ systems.
Those are system specifications rather than guaranteed performance through every RV construction.
The actual connection can be affected by:
- trailer length
- metal body structures
- cargo
- interior partitions
- antenna positioning
- other wireless equipment
The original Vision S also used digital wireless technology, so changing to S+ should not be viewed as a universal solution to every signal problem.
Test any system on the actual connected RV and tow vehicle.
| Your Main Priority | What to Evaluate |
|---|---|
| Keep a working existing system | Original Vision S-compatible replacement parts and repair cost |
| Get clearer camera video | Complete Vision S+ camera-and-monitor upgrade |
| Record rear or side footage | Supported S+ recording modes, camera channels, and microSD storage |
| Use several views together | Compatible camera count, 5-inch vs. 7-inch monitor, display modes |
| Improve signal stability | Mounting position, antennas, actual trailer configuration, and supported transmission range |
| Watch an area while parked | Motion detection, recording support, and continuous camera power |
Monitor rule: Choose screen size around viewing distance and camera count. Choose the system generation around camera compatibility and the features you actually need.
Upgrading a Furrion Pre-Wired RV: What Can You Reuse?
Many travel trailers and fifth wheels have a rear camera-preparation location, often near the top center of the rear wall.
Some are labeled as prepared for a Furrion camera system.
That preparation can simplify installation, but it does not mean the RV already contains a functioning camera or wireless receiver.
The prepared location typically relates to mounting and electrical power.
The camera and monitor still need to be compatible with each other.
1. Identify Your Existing Hardware
Before ordering replacement equipment, determine which situation applies to your RV:
- Furrion pre-wiring only, with no camera installed
- a working Vision S camera and monitor
- a Vision S system with one failed component
- an existing Vision S+ system
- a third-party camera installed at a Furrion-style location
Check the actual model number printed on the camera or display.
For example, common older Vision S kit numbers include FOS05TASF and FOS07TASF.
Current Vision S+ kit numbers include FOS5HTASF and FOS7HTASF for rear-camera configurations.
The similar product names are one reason it is important to record the exact part number rather than relying on the words "Furrion camera."
2. Check the Rear Mounting Bracket and Power Connector
Some Vision S and S+ sharkfin cameras can use the same style of prepared mounting bracket.
That means a complete S+ upgrade may be able to reuse the existing camera location without additional drilling.
However, inspect the actual bracket for:
- correct shape and attachment points
- physical damage
- missing fasteners
- water intrusion
- connector condition
- appropriate sealing
On some RVs, the camera power supply is controlled by the running-light circuit.
The camera may therefore receive no power until the tow vehicle's lights are switched on.
Before troubleshooting wireless pairing, confirm that the camera actually has power.
Some tow-vehicle electrical systems may also require an approved power adapter or another manufacturer-recommended solution to supply stable camera power.
For a backup camera for trailer installation, the exact RV power connection matters more than the brand name printed on the mounting cover.
3. Treat Camera Pairing as a Separate Step
A camera can fit physically and receive the correct power yet still be unable to communicate with a particular monitor.
This happens when the camera and display belong to incompatible electronic systems.
When replacing Vision S with S+:
- Identify every camera currently installed.
- Select the matching S+ replacement cameras.
- Confirm the mounting and power compatibility of each position.
- Install the compatible S+ monitor.
- Pair each new camera using the S+ instructions.
- Verify the correct rear, left, right, and optional doorway channel assignments.
Do not discard working original equipment until the new system has been tested.
If the upgrade cannot be completed in one step, plan around the fact that incompatible old cameras will not temporarily operate through the new S+ display.
4. Check the Side Marker Lights
Side-camera upgrades can be more complicated because some systems use cameras integrated with marker-light housings.
For certain Vision S-to-S+ upgrades, the existing marker-light bases may be reusable with the correct newer camera components.
That does not establish universal compatibility.
Confirm that the new installation preserves:
- marker-light function
- correct electrical connections
- proper lens and housing fit
- weather sealing
- camera orientation
Test both the required lighting and the camera view after installation.
5. Test the Complete Tow Vehicle and RV
Complete the initial camera pairing while parked.
Then test the final setup with the RV and tow vehicle connected.
Check:
- camera power with the required lights or ignition state
- rear and side camera pairing
- correct image orientation
- monitor brightness
- single- and multi-camera display modes
- wireless signal stability
- recording and playback where supported
- camera mounting and weather seals
Repeat the signal check with the trailer doors closed and normal cargo installed where practical.
For a long fifth wheel, a camera that pairs successfully while the tow vehicle is parked close to the trailer may still need testing from the monitor's real operating position.
Upgrade checklist: Reuse compatible brackets and power wiring when appropriate, but replace the incompatible camera-and-monitor electronics when changing generations. Test physical fit, power, pairing, and image quality separately.
Repair Vision S, Upgrade to S+, or Choose Another RV Camera System?
There are three practical upgrade paths.
The best choice depends on which components already work, whether recording matters, and how many views you want around the RV.
Option 1: Repair the Existing Vision S
Keeping the original system can make sense when:
- the video quality is sufficient for your needs
- the camera and monitor already pair reliably
- only one compatible component needs replacement
- you do not need S+ recording or newer camera resolution
This avoids replacing equipment that is still working.
The main challenge is finding the correct original-generation replacement component.
Compare the cost and availability of that part with the price of a complete newer system.
Option 2: Upgrade the Complete System to Vision S+
Vision S+ is worth considering when the goal is to move to newer Furrion equipment with:
- 1080p cameras
- updated monitor options
- compatible multi-camera expansion
- microSD recording
- supported firmware updates
Because the generations cannot be mixed, include every required camera and the compatible monitor in the upgrade budget.
Some existing mounts and power connections may reduce installation work.
If your RV already has Vision S side cameras, also account for the necessary S+ side-camera hardware.
Option 3: Install a Matched Aftermarket RV Camera System
An aftermarket system can provide another upgrade path, particularly when the owner wants different monitor sizes, camera layouts, recording features, or installation costs.
The important distinction is that a third-party camera may be designed to use a Furrion-style prepared RV mounting point without being electronically compatible with a Furrion monitor.
For a new RV backup camera, select the camera and display as a matched system unless the manufacturer explicitly confirms another combination.
AUTO-VOX offers several relevant options.
| AUTO-VOX System | Main Configuration | When to Consider It |
|---|---|---|
| W10 for Furrion | 7" monitor with rear camera; compatible dual-camera configuration available | Matched rear-camera kit for a suitable Furrion-prewired RV |
| WF1 | 7.2" monitor, 1080p rear camera, DVR recording | Rear observation with recording and an RV-prewired installation option |
| WF4 | 7.2" monitor, rear + left + right cameras | Separate rear and side views for a compatible RV |
| CampSync D1 | 3 physical cameras / 4 lenses | Two rear perspectives plus left and right camera views |
W10: A Matched Kit for Furrion-Prepared RVs
AUTO-VOX W10 is designed around suitable Furrion-prewired RV installations.
It provides a 7-inch HD monitor with a matching wireless rear camera.
The system supports a compatible second camera in selected configurations.
Its published features include:
- 2.4 GHz digital wireless video
- up to 230 feet of transmission range under specified conditions
- infrared night viewing
- an IP68-rated camera housing
- a compatible two-camera viewing option
It can be a practical choice when the priority is a straightforward rear-camera upgrade using a suitable prepared mounting location.
W10 is a matched AUTO-VOX system. Its camera should not be expected to pair with an existing Furrion Vision S or Vision S+ monitor.
WF1: Rear Observation With DVR Recording
WF1 combines a 1080p rear camera with a 7.2-inch display and recording functionality.
It is designed for suitable Furrion-prewired RV camera locations and uses digital wireless video transmission.
Its published configuration includes DVR recording support and a supplied 32GB memory card in the specified package.
WF1 can suit an RV owner who wants a matched rear-camera replacement with a larger display and recording.
Check the exact package, power connection, recording configuration, and availability before purchase.
WF4 and CampSync D1: Multiple Camera Perspectives
WF4 provides one rear camera and two side cameras through a 7.2-inch monitor.
It supports separate single, dual, and triple display modes.
CampSync D1 uses one dual-lens rear camera and two side cameras, providing three physical cameras and four lenses.
Its display can present two different rear perspectives alongside selected left- and right-side views.
These systems can be useful for RV owners who want more than a single rear-camera image.
The cameras provide separate perspectives. They do not create a stitched overhead vehicle image.
Both systems require suitable RV mounting locations, compatible electrical power, and stable video transmission.
Do Aftermarket Systems Pair With the Furrion Monitor?
Do not assume so.
Furrion pre-wired compatibility can describe the mounting position and power connection.
It does not mean the camera uses the same proprietary wireless communication protocol as Vision S or Vision S+.
An aftermarket wireless backup camera generally needs its corresponding compatible monitor.
That distinction should be checked before ordering any third-party replacement kit.
RV Camera Upgrade Options for Furrion-Prepared Locations
Prices, variants, and availability may change. Confirm the current product listing and selected package before purchasing. AUTO-VOX products shown here are separate matched camera systems; Furrion-prepared mounting compatibility does not mean their cameras pair with Furrion Vision S or Vision S+ displays. Check the RV's actual bracket, connector, DC power supply, side-marker arrangement, and wireless performance.
Frequently Asked Questions
What is the main difference between Furrion Vision S and Vision S+?
Vision S+ is the newer generation, offering 1080p camera options, updated 5-inch and 7-inch monitors, microSD video recording, and firmware-update support. Original Vision S kits commonly used 720 × 480 cameras. Both generations support multiple camera views on appropriate configurations, but their cameras and monitors are not cross-compatible.
Will a Vision S+ monitor work with my existing Vision S camera?
No. Vision S+ displays are designed for compatible Vision S+ cameras. An older Vision S camera cannot be paired to a Vision S+ monitor. If you want to retain the original camera, use a replacement monitor documented for the original Vision S generation.
Can I install a Vision S+ camera in an older Vision S mounting bracket?
Some original Vision S rear mounting brackets and power connections can be reused with compatible Vision S+ equipment. However, this is physical and electrical compatibility, not camera-to-monitor compatibility. Confirm the exact bracket and connector, inspect their condition, and use the matched S+ camera and display.
Can I reuse my old Vision S side cameras when upgrading to S+?
No. The older cameras cannot pair with an S+ display. Some existing marker-light bases and wiring may support the correct newer S+ side-camera hardware, depending on the installation. Verify the exact parts and preserve the required marker-light function and weather sealing.
Does Furrion Vision S+ record video?
Yes. Compatible Vision S+ monitors support video recording to a microSD card. Recording capacity and operation depend on the card and monitor settings. Check the manual for the supported card requirements, and confirm whether a card is included with the selected package.
Is the 7-inch Vision S+ monitor better than the 5-inch version?
The 7-inch screen provides more physical display area, which can be useful for larger RV cabs and multi-camera viewing. A 5-inch monitor can be sufficient for a single rear view when positioned close to the driver. Both sizes need compatible S+ cameras; screen size does not change cross-generation pairing rules.
Does a Furrion-prewired RV need a Furrion camera?
Not necessarily. Some aftermarket camera kits are designed to use suitable Furrion-prepared mounting locations and electrical connections. However, those cameras generally require their own compatible monitor. Check the mounting bracket, connector, power supply, and system compatibility separately.
What is the best upgrade if my original Vision S system is still working?
If the image quality and viewing features meet your needs, keeping the working Vision S system may be the most practical option. Upgrade to a complete Vision S+ system when newer camera resolution, recording, or updated equipment justifies replacing the existing electronics. A separate matched aftermarket kit is another option when its features and installation better suit your RV.
Final Thoughts: Check Compatibility Before Choosing the Newer System
Furrion Vision S and Vision S+ are closely related RV observation systems, but they are different electronic generations.
The original Vision S can still provide useful rear and side observation when its components are working and compatible.
Vision S+ adds higher-resolution camera options, recording, and newer monitor functionality.
For an RV owner planning an upgrade, the deciding issue is often component compatibility.
The camera, monitor, mounting bracket, and RV power connection should each be checked separately.
Before ordering replacement equipment:
- Identify the existing Vision S or S+ camera and monitor model numbers.
- Decide whether a repair, a larger display, recording, or additional camera views are the main goal.
- Remember that Vision S and S+ cameras and monitors cannot be mixed.
- Inspect the rear bracket, pre-wired connector, and available power supply.
- Confirm side-marker camera and lighting compatibility if applicable.
- Choose a complete matched system when changing electronic generations.
- Test the final camera views, wireless signal, and recording functions before regular travel.
If you only need to replace a failed original Vision S component, finding the correct same-generation part may be the simplest solution.
If you want 1080p cameras and recording, a complete Vision S+ upgrade is the appropriate Furrion path.
If you prefer a different monitor or camera arrangement, a compatible aftermarket kit can provide another option while using suitable existing RV mounting and power infrastructure.
The key is to separate what physically fits your RV from what electronically works together. That one distinction can prevent an expensive camera or monitor purchase that will never pair with the equipment you already own.
